Nano VNA-F V2, 3 GHz Analyzer
Product Code: VU9s4Zo
Rating: Be the first to write a review
Brand: HI
Weight: 80.0g
Product Condition: New
The very capable and inexpensive NanoVNA vector network analyzer has
become very popular among hams. Here it comes with a Demo-kit!
Description
The NanoVNA-V2 portable vector network analyzer is a new generation. The measurement range is extended to 50KHz-3000MHz, and the dynamic range is larger, reaching 80db, which can be used to debug the UV frequency. The measurement is more accurate and more practical with a simple, flexible and fast operation interface.
Parameters
1. Measuring frequency range: 50KHz-3000MHz;
2. RF output power: -9dbm (error within 1GHz: plus or minus 1db);
3. Frequency accuracy: <0.5ppm
4. S21 dynamic range: 70dB (1.5GHz), 60dB (3GHz)
5. S11 dynamic range: 50dB (1.5GHz), 40dB (3GHz)
6.2 Port return loss: 20dB typ (1.5GHz), 13dB min (3GHz)
7. USB interface: USB Type-C communication mode: CDC (serial)
8. Number of calibration points: 101 points
9. Number of scanning points: 101 points
10. Display tracking: 4 tracks
11. Mark: 4 mark points (mark mark bar can be moved up and down on the screen)
12. Setting save: 5 (after saving, it can be directly recalled when it is used next time it is turned on, no need to recalibrate, the next time it is turned on, the saved parameters before the last shutdown are automatically recalled)
13. Scan time: about 1.9s/1 time (50kHz ~ 3000MHz full frequency band)
14. It can measure S parameters, voltage standing wave ratio SWR Smith chart, phase diagram, group delay,...;
15.4.3 inch IPS LCD screen, IPS TFT (800x480) viewing angle is close to 180°, long-term use will not hurt your eyes;
16. The aluminum alloy case is used to effectively shield electromagnetic interference, making S21 a dynamic range better than 80dB within 1GHz
17. Compact design, body size 125mm*75mm*20mm, compact and portable;
18. The radio frequency interface is SMA, which is convenient for connecting all kinds of DUTs;
19. Using 5000mAh super-capacity lithium battery, the battery life can reach 7 hours;
20. Full touch screen design, support 3 side buttons at the same time, flexible and convenient operation;
21. English menu
22. Support screen brightness adjustment
23. Upgrade firmware through virtual U disk, no programmer is needed, only one USB cable is needed to upgrade firmware;
22. Expand a USB power output interface, 5V/1A output (can be used as a power bank);
24. Using high current 2A charging IC, the charging time is shorter;
25. Support the host computer, you can use the computer as the display operation interface;
26. Weight with plastic packing box: 400g
become very popular among hams. Here it comes with a Demo-kit!
Description
The NanoVNA-V2 portable vector network analyzer is a new generation. The measurement range is extended to 50KHz-3000MHz, and the dynamic range is larger, reaching 80db, which can be used to debug the UV frequency. The measurement is more accurate and more practical with a simple, flexible and fast operation interface.
Parameters
1. Measuring frequency range: 50KHz-3000MHz;
2. RF output power: -9dbm (error within 1GHz: plus or minus 1db);
3. Frequency accuracy: <0.5ppm
4. S21 dynamic range: 70dB (1.5GHz), 60dB (3GHz)
5. S11 dynamic range: 50dB (1.5GHz), 40dB (3GHz)
6.2 Port return loss: 20dB typ (1.5GHz), 13dB min (3GHz)
7. USB interface: USB Type-C communication mode: CDC (serial)
8. Number of calibration points: 101 points
9. Number of scanning points: 101 points
10. Display tracking: 4 tracks
11. Mark: 4 mark points (mark mark bar can be moved up and down on the screen)
12. Setting save: 5 (after saving, it can be directly recalled when it is used next time it is turned on, no need to recalibrate, the next time it is turned on, the saved parameters before the last shutdown are automatically recalled)
13. Scan time: about 1.9s/1 time (50kHz ~ 3000MHz full frequency band)
14. It can measure S parameters, voltage standing wave ratio SWR Smith chart, phase diagram, group delay,...;
15.4.3 inch IPS LCD screen, IPS TFT (800x480) viewing angle is close to 180°, long-term use will not hurt your eyes;
16. The aluminum alloy case is used to effectively shield electromagnetic interference, making S21 a dynamic range better than 80dB within 1GHz
17. Compact design, body size 125mm*75mm*20mm, compact and portable;
18. The radio frequency interface is SMA, which is convenient for connecting all kinds of DUTs;
19. Using 5000mAh super-capacity lithium battery, the battery life can reach 7 hours;
20. Full touch screen design, support 3 side buttons at the same time, flexible and convenient operation;
21. English menu
22. Support screen brightness adjustment
23. Upgrade firmware through virtual U disk, no programmer is needed, only one USB cable is needed to upgrade firmware;
22. Expand a USB power output interface, 5V/1A output (can be used as a power bank);
24. Using high current 2A charging IC, the charging time is shorter;
25. Support the host computer, you can use the computer as the display operation interface;
26. Weight with plastic packing box: 400g
Bulk Buying Options
- single - $169.00 -
- 2 up to 5 - $149.00 - per item
$169.00 inc. tax
Updating Order Details
Please do not refresh or navigate away from the page!
Customer Reviews
No Reviews Posted Yet - be the first! (write review)