Mini60 HF ANT SWR Antenna Analyzer

FEATURES

• mini size: 9.1*5.3*2.5cm
• weight:220kg
• with 3.7v li-on 1500ma battery(rechargeable)
• Support for Android 2.2 -4.0 or new version, supports 3--10 inch  mobile phone and tablet,
• support windows via software 
• Automated antenna SWR analyzer
• Hardware:

• Precise and self-calibrating reflectometer design measures forward and reflected signals and impedance data
• Display 2x16 with optional backlight
• Precision DDS signal generator (AD9851) used as signal source
• USB port only for battery charging
• Buzzer

• Operation:
  • Manual control option displays SWR and complex impedance at selected frequencies
  • Automatic scanning results displayed as frequencies of lowest SWR and complex impedance
  • Battery operated for field use or use external 13.8V wall adaptor
  • Power saving modes
  • Multi-point calibration for better accuracy
• Instrument Capabilities:
• Measure antenna electrical parameters: SWR, impedance (resistance + reactance), capacitance, inductance
• Measure feedpoint impedance
• Measure ground loss
• Adjust antenna tuners and determine loss
• Measure inductors and capacitors
• Measure coax transmission line (SWR, length, velocity factor, approximate Q and loss, resonant frequency, and impedance)
• Measure and determine optimum settings for tuning stubs: SWR, approximate Q, resonant frequency, bandwidth, impedance
• Determine characteristic impedance of transmission line
• Determine length of ¼ and ½ wave phasing lines
• Coaxial Cable Loss
• Determine antenna tuner loss
• Measure balun loss
• Measure inductor Q
• Estimate quartz crystal parameters
• Measure magnetic loop resonance and SWR

Bluetooth connection method \ :

1, the installation software Andrews
 2 , press the SET button to open the talent PC link
3 Press the DOWN button to confirm dc plug in the Bluetooth antenna head
4 Open the Bluetooth phone paired with the day assigned for 1234
 5 Open Android software click the link prompts the connection point of the scan is completed successfully

SPECIFICATIONS

• Frequency Generation & Control:
  • 1 - 60 Mhz
  • Source impedance: 50 Ohms
  • Stability: +/- 100 ppm
  • Spectral Purity: Harmonics down >- TBD dB beyond 60 MHz
  • Step Size: User configurable increments of 100 Hz, 1 kHz, 10 kHz, and 100 kHz
• Usable Measurement Range:
• SWR: 1.0 to 9.99
• Impedance: approx. 5 to 2000 ohms
• Adjustable: 2.0 Volts pp (typ)
• 3.7v li-on battery
• External: 12 to 14 Volts DC, 500mA
• RF Output:
• Power supply: DC 12-14V

        Controls:

• Pushbuttons (5): "Mode", "Band", "Config", "Scan", "Up", "Down"
• Switch: "Power On"
• USB: Mini-B receptacle
• External power: 2.1mm Power Jack (center pin positive)